Brunel Engineering Services Ltd
TEL: 01225 784019
Brunel Engineering Services and igluetech

Read more about Brunel Engineering Services on the 'About Us' page

Please call us, we look forward to hearing from you.

tel: 01225 784 019
fax. 01225 783 400

Premelt

The Brunel Engineering Services HM25 Premelt Tank.

Our HM25 melting pot is designed to melt wax or oil based materials up to a temperature of 180°C via a choice of thermostats.

The heated material can then be decanted into another vessel by turning a handle driven a gear pump, with the heated material flowing out via a nozzle into your receiving container.

The HM25 can be used to melt candle and paraffin waxes, tar, butter based products, chocolate or EVA based hot melt glues in chip, prills, slat, pillow or block forms.

Hot melt hand guns such as Reka, Bhunnan, Power Adhesives etc. can be topped up using the HM25.

Larger Hot melt tanks, e.g. Robatech®, Nordson, ITW, Valco- Melton can also be topped up using the HM 25 mounted on rails over the lid opening on the host tank.

The HM25 can melt up to 6 litres of material, depending on its melt temperature, and density, every 30-60 minutes.

Our HM25 can be finished in stainless steel instead of powder coated mild steel.

Versions with fixed thermostat to 150°C or a variable thermostat either 30-90°C or 60-190°C are available.

A safety temperature cut-out is fitted as standard

Power required is single phase 220/240vAC 1kW via 13A plug top.

A 110vAC version is available by request

Dimensions; 330mm x 270mm x 430mm height including handle

If you need more of your heated material the HM25 melting pot is the answer.

1 product 
1 product
 
Copyright © 2017 Brunel Engineering Services Ltd  |  All Rights Reserved
The Street
Broughton Gifford
Melksham
Wiltshire
SN12 8PH
United Kingdom
t: 01225 784019
e: general@brunelengineeringservices.co.uk